4G Vehicle status detection OBD Tracker device G-M100
The G-M100 is a 4g wireless communication technology and gps/bd system positioning technology, which is a 4g intelligent information acquisition terminal built for the car network. with obd data flow detection, fault code detection, frame number reading, fatigue driving setting, power off alarm, over-speed alarm, water temperature threshold setting, idle alarm, wifi network hot spots and so on. with a global positioning service platform to achieve real-time acquisition of vehicle data, tracking and positioning, and vehicle status monitoring.
|1. Precise positioning with an accuracy of 5 meters.
2.GPS+AGP+Beidou precise positioning.
3.Wide voltage design supports 9V-35V.
4. Functions: OBD data stream, power failure alarm, speeding alarm,
vehicle status detection, WIFI network hotspot, etc.
|Electrical characteristics：||Environmental characteristics：||Communication characteristics：|
|Power supply mode: battery power supply
Operating voltage range: DC 9V -35V
Working current: 12V/30MA-60MA
Sleep current: 12V/5MA-15MA
Built-in battery capacity: 180 mAh
(3.7V polymer battery) optional
|Operating temperature range: -20℃-70℃
Storage temperature range: -30℃-80℃
Operating humidity range: 5%-95%
|Communication module brand/chip model: QUECTEL EC20
Communication frequency band: FDD-LTE: B1/B3
TDD-LTE: B38/ B39/ B40/ B41
EVDO/CDMA2000 1x: BC0
SIM card: standard SIM card
Communication antenna: external antenna
|GPS/BD positioning characteristics：||External interface：||Form factor：|
|Positioning module brand/chip model: Zhongke Microchip
Cold start time: 32 seconds on average
Hot start time: 1 second on average
Sensitivity (tracking): -162DBM
Positioning antenna: built-in antenna
|Serial port: 3.3V serial port one way
CAN: 1 way
K line: 1 way
|Appearance size: 59mm * 45mm * 22mm
Shell material: ABS plastic
Host weight: 54 grams