4G high cost free mobile app car motorcycle mini GPS tracker MT-009

Short Description:

MT-009 4G Instruction manual MT-009Z is a 4G full Netcom vehicle positioning terminal carefully built for the Internet of Vehicles. It integrates 4G full Netcom wireless communication technology and GPS/BDS satellite navigation and positioning technology. 3-axis sensor, intelligent power-saving wake-up work. It has functions such as DC detection, ACC detection, power failure alarm, overspeed alarm, mileage statistics, and remote fuel and power cutoff. With the global positioning service pla...


  • Min.Order Quantity: 10 Piece/Pieces
  • Supply Ability: 30000 Pieces per Month
  • Port: Shenzhen, China
  • Payment Terms: L/C,D/A,D/P,T/T
  • 4G type : SIMCOM
  • Product Detail

    Product Tags

    MT-009Z is a 4G full Netcom vehicle positioning terminal carefully built for the Internet of Vehicles. It integrates 4G full Netcom wireless communication technology and GPS/BDS satellite navigation and positioning technology. 3-axis sensor, intelligent power-saving wake-up work. It has functions such as DC detection, ACC detection, power failure alarm, overspeed alarm, mileage statistics, and remote fuel and power cutoff. With the global positioning service platform, the real-time acquisition, tracking and positioning functions of vehicle data are realized.

    cheap 4G GPS tracker (2)

    function name

     Yes

    No

    function name

    Electrical Characteristics

    Power supply

    Power supply

    Operating voltage range

    Operating voltage range

    Working current

    Working current

    sleep current

    sleep current

    Built-in battery capacity

    Built-in battery capacity

    Environmental characteristics

    range of working temperature

    range of working temperature

    Storage temperature range

    Storage temperature range

    Operating humidity range

    Operating humidity range

    Communication

    Communication module brand/chip model

    SIMCOM XM808

    Communication frequency band

    LTE/4G

    Supported frequency bands

    LTE-FDD:B1/B3/B5/B8

    LTE-TDD:B38/B39/B40/B41

    SIM card

    Micro SIM card

    communication antenna

    Built-in antenna

    Antenna Specifications

    FPC Antenna

    GPS/BD positioning features

    Positioning module brand/chip model

    SIMCOM MX808

    Targeting

    Beidou+GPS

    cold start time

    Average 32 seconds

    warm start time

    average 1 second

    tracking sensitivity

    -162dBm

    positioning antenna

    Built-in ceramic dielectric antenna

    Antenna Specifications

    25mm*25mm*4mm

    GPS band

    L1:  1575.42±1.023MHz

    Beidou frequency band

    B1:  1561.098±2.046MHz

    Number of satellite channels

    64

    positioning accuracy

    <10m (1σ)

    Timing accuracy

    <30ns (1σ)

    Speed accuracy

    <0.1m/s (1σ)

    maximum acceleration

    4g

    Maximum speed

    515m/s

    maximum height

    18000m

    External interface

    cut off oil and electricity

    One external relay can be connected

    ACC detection input

    ACC detection port all the way

    Dimensions

    Host size (length, width and height)

    83mm*33mm*13.5mm

    shell material

    ABS plastic

    IP protection class

    Host weight

    35 gram

     

    function

    Function breakdown

    description

    Location data report

    Location tracking

    The positioning information such as latitude and longitude is returned according to the set interval time.

    Vehicle status detection

    Ignition/extinguish state

    The ACC switch status is included in each uploaded packet.

    Vehicle power failure reminder

    Turn on the backup battery. When the host detects that the vehicle voltage is less than 5V, it will report the power failure reminder.

    Low pressure alarm

    When the host detects the vehicle voltage 5-10V, it reports a low-voltage alarm reminder.

    Over Speed alarm

    The platform sets the maximum speed limit value. When the GPS speed is greater than the set value, the over-speed alarm is reported.

    Oil line detection

    Support platform and SMS to cut off oil and gas, oil and gas function

    Illegal removal of the alarm

    When the terminal generates a power failure alarm or triggers the light status, if both conditions are generated within 2 minutes, the illegal removal alarm is reported.

    3D Collision alarm

    When the collision threshold alarm occurs, the x axis, y axis, z axis acceleration data of the acceleration sensor can be sent to the customer platform, as well as the speed of ten seconds before and after the collision, and other information.

    Other Functions

    Blind zone re-transmission function

    The terminal is located and not online, and the data is stored up to 300. Upload when the signal is online normally

    EPO assisted positioning function

    The terminal supports the EPO assisted positioning function to enhance the positioning effect.

    Inflection point

    When the device orientation angle changes more than a certain angle, immediately upload a position data to optimize the trajectory.

    Remote upgrade

    Upgrade the housekeeper remote upgrade.

    Low power consumption

    Sleep mode

    G-sensor senses the vibration state of the vehicle in real time, and the power is in the sport mode. When the host has no vibration for 5 minutes, it enters the static mode, and  the GPS module is turned off, and the vibration enters the sport mode.

    Support power failure alarm, overspeed alarm and other multiple alarm functions;
    It can be connected to an external oil-cutting relay/wireless oil-cutting accessory, which supports the function of cutting off the oil circuit/circuit of the monitored object, and realizes functions such as oil-cutting and power-cutting;
    Support the function of electronic fence, users can delineate virtual electronic fence through the platform/APP, when the device enters or exits the fence, it can be recognized by the platform and an alarm will be issued;
     When an alarm occurs, an alarm text message/phone can be sent to the monitoring number, and the alarm can be uploaded to the platform at the same time;
    The terminal adopts industrial-grade high-stability GPRS module from well-known manufacturers, built-in 4G high-sensitivity antenna, supports TCP/IP data transmission, and supports domain name/IP address connection to the server;
    Built-in large-capacity storage chip, which supports data storage in offline state and supplementary transmission of blind spot data; when the vehicle is in a place with weak wireless signal or serious interference, the vehicle will temporarily store the data of vehicle operation in FLASH, and when the wireless signal returns to normal After that, these data can be supplemented, so that the data is not missing. ;
    Built-in 3-axis acceleration sensor, integrated with precise acceleration algorithm, real-time acquisition of vehicle status and other vehicle conditions;
    High-sensitivity GPS/BDS dual-satellite positioning module, anti-jamming ceramic antenna, to achieve more stable satellite search signal, support AGPS fast positioning tracking, synchronous timing;
    In sleep mode, it supports low battery voltage monitoring alarm, abnormal vibration alarm and other vehicle startup, flameout, and sleep automatic reporting messages;
    Support online remote upgrade and remote configuration of product parameters.
    Low-power energy-saving mode, which can accurately judge the ignition and flameout status of the car, and the intelligent sleep and wake-up mechanism can reduce the average power consumption of the entire system;

     

    531ba900bd718b87791bac1d7f773ee
    d5cb51235f36923d6709b769e06e32f
    4471f3967883e252633cb5019073a8a

  • Previous:
  • Next: