China OEM How To Remove A Starter Interrupt Device - SMS padlock gps navigation free update gps en español – Dragon Bridge

1.Working model

Rechargeable version：

1.The default return time is 5 minutes, the platform can send instructions to modify.

2.Locks in standby mode, through the GPRS and the platform to maintain a regular connection.

3. Lock in standby mode,to save power,will not open GPS positioning, return data using the last GPS positioning or LBS positioning data.

4. Lock operation will trigger a GPS positioning.

5.Locks, the lock will detect vibration, general vibration will sound buzzer warning, violent vibration will trigger mobile alarm, will send alarm data to the tracking platform.

6.Through Bluetooth or platform remote unlock, unlock and lock operation will trigger alarm data, respectively, to the platform to send unlock alarm and lock alarm data.

2.Instruction

2.1 Warming:

1. GLL130 design as anti-break and waterproof , All bulk ordering GLL-130 devices install the logistic SIM card since the factory , can’t be open the lock body.

2. The GLL-130 sample lock is designed able to open inside the install the SIM card . Attached is the process to install the GLL-130

3. before open the lock inside , please wash the hand to avoid the electrostatic damage the circuit board

4. The lock Sample is not designed for customer to install the SIM , its connect wire is short , please open the lock very gentle.

2.2 Pick up the SIM card

Requirements：

1. (No matter 2G,3G,4G) need support Internet 2G：GSM 850/900/1800/1900，in the 2G network covered.
2. with the function of SMS function, Caller Identification , Calling

Unlock time count

every time lock is unlock it will count it , manager will know driver and user unlock the lock without the authorization.

Vehicle playback

Playback Details

Delivery a Report by excel

Set Interval time

*the lock interval time can be adjust in Batch Operation , form 30 second to 86400 second , the longer interval time it is , the longer device standby

When do a presention ,turn into a long standby mode : from 30 – 180 second  

When do the long trip transation to save power ,suggest in half sleep mode: 1800 second

3.SMS Message Command

1. comand to set ip, port：#02#47.90.39.93,10095#

If success reply ok, fail reply fail

2. Set APN：#03#CMNET# ，

If success reply ok, fail reply fail

3.Query parameters：#04#0# 

(return device ID, APN, IP, port, firmware version, power, networking status, signal strength, GPS satellite number, lock interval, lock interval, longitude, latitude, etc.)

4. Restart the device：#01#0#  

If success reply ok, fail reply fail

SIM Card Requirements：

* (No matter 2G,3G,4G) need support Internet 2G：GSM 850/900/1800/1900，in the 2G network covered.

* with the function of SMS function, Caller Identification , Calling function