G-V803 GPS Vehicle Tracker with tachograph and speed Governor function, which is a high performance digital and electric recording device with a set of embedded MCU. Product has developed China Transport has been developed, Vietnam Standard, the Kenya Standard, the Chile Governance Standard, and the English General Standard.
The Speed governor is a newly designed function, when the car speed is trying to be more than a set data, the engine will be slow down. It works both for electronic & Mechanical speedometer, so that means is workable for all vehicles.
- Functions
| No. |
Function |
Detail |
|
1 |
Remote monitor function |
Real-time tracking: GPRS online, real-time checking current position. |
| Real-time: fixed time return, return current GPS information in fixed interval. | ||
| Fixed-distance tracking: fixed distance return, return current GPS data in the fixed distance. | ||
|
2 |
Remote control cut off the engine |
Remote control supply/cut oil |
|
3 |
Accident data |
Accident spot data: remotely collect the last 10 seconds, the real-time vehicle’s running speed value and brake status before every 20 seconds parking, collect one data every 0.2 seconds. |
|
4 |
Parameter setting and checking |
Remote parameter setting and check: VIN, vehicle No., vehicle classification, driver’s code, driver’s license No., characteristic parameter. |
|
5 |
Status record |
The terminal record the vehicle’s driving status in 360 hours use<=1 minute as the interval. |
|
6 |
Mileage statistics |
Electronic mileage: the terminal calculates the driving mileage by the vehicle speed sensor. |
|
7 |
ID record |
Use IC card to record the driver’s code and driver’s license code to identify and record the ID. |
|
8 |
Fatigue driving |
Check whether the current driving achieve to the fatigue driving threshold value, and will have fatigue alarm |
|
9 |
Printer function |
Print the average speed, vehicle information(include vehicle No., driver’s code, driver license No., print time etc) in 15 minutes when in parking status. |
|
10 |
SMS |
The monitoring center can send SMS to the terminal. |
|
11 |
Listen-in |
The center can monitor the voice information in the car |
|
12 |
Hands off Voice communication |
The terminal dial: Driver can dial telephone number by terminal preserved number. |
| Pick up phone: can pick up the call from the center | ||
|
13 |
SOS alarm |
SOS function, driver can use this function when in emergency situation |
|
14 |
Over speed alarm |
Set the over speed alarm to the designated vehicle, if the driving speed over this value, it will alarm |
|
15 |
Power-save function | Into the preset save time, auto-shut down GPS function, it will auto-start when emergency occurs. |
|
16 |
Blind area added upload |
When in blind area, auto-save GPS information (1000 pcs), auto-upload when vehicle leaves blind area. |
|
17 |
Remote-reset |
The monitor center can remote reset the car terminal |
|
18 |
Self-checking |
When the terminal powers on, it will auto-check working status, and send the self-checking information. |
|
19 |
Alarm hint |
3 ways to choose: 1. Buzzer; 2. TTS; 3. Buzzer+TTS |
| Pin | Function | I/O | Specification | Note |
| 1 | Power + | I | DC 9V~36V | |
| 2 | Power - | I | Negative signal | |
| 3 | Left steering lamp | I | Detect 8V-36V effective | |
| 4 | Right steering lamp | I | Detect 8V-36V effective | |
| 5 | High beam line | I | Detect 8V-36V effective | |
| 6 | Brake signal line | I | Detect 8V-36V effective | |
| 7 | Magnetometer signal line | I | Check door open or not | |
| 8 | Vibration sensor check line | I | Check taking iron effective | |
| 9 | Air-conditioner check line | I | Detect 8V-36V effective | |
| 10 | Engine check line | I | Detect 8V-36V effective | |
| 11 | Speed sensor detect line | I | Detect electronic impulse effective | |
| 12 | ACC checking line | I | Detect 8V-36V effective | |
| 13 | Horn check line | I | Detect 8V-36V effective | Used for horn checking alarm |
| 14 | Custom high checking line 1# | I | Detect 8V-36V effective | When in security, use this center control to lock door |
| 15 | Custom high checking line 2# | I | Custom high checking line 1# | When in security, use this center control to open door |
| 16 | Custom low checking line 1# | I | Detect taking iron effective | |
| 17 | Custom output high | O | Output voltage is the supply voltage 2V | |
| 18 | Robbery checking | I | Detect taking iron effective | |
| 19 | fuel control output + | O | External connect with relay to control the signal line | |
| 20 | fuel control output - | O | ||
| 21 | Custom output low signal | O | Output ground signal that means taking iron | |
| 22 | AD voltage checking 2 | I | Checking 0-24V voltage | |
| 23 | Ground | I | ||
| 24 | AD voltage checking | I | Detect 0-24V voltage |
