Long standby GPS Tracker
LTS-3YS
Precise positioning | Strong standby
Specifications and Instructions
| project | specification |
| Charging voltage | Not rechargeable |
| Built-in battery | 4800 mAh (3.7V) |
| Volume | 63mm*43mm*28mm |
| Weight | 130g |
| Operating temperature | -20° to 55° C |
| Working humidity | 5% to 95% Non-condensing |
| GSM module | MT6261D quad-band GSM 850/900/1800/1900Mhz |
| GPS chip | TD1030 GPS+Beidou Dual-mode positioning chip |
| GPS sensitivity | -162Dbm |
| GPS frequency | L1, 1575.42 MHz |
| C/A code | 1.023 MHz chip rate |
| Channels | 56 channel all-in-view tracking |
| Position accuracy | 10 meters, 2D RMS |
| Speed accuracy | 0.1 m/s |
| Time accuracy | Satellite time 1 microsecond synchronization |
| Default data | WGS-84 |
| Update time | Average 0.1 sec. |
| Hot Start | Average 1 sec. |
| Warm start | Average 30 sec. |
| Cold start | On average 32 sec. |
| maximum height | 18,000 meters (60,000 feet) max. |
| Maximum speed | 515 meters/second (1000 knots) max. |
| Maximum acceleration | Less than 4g |
| Instantaneous displacement | 20 m/sec |
| Standby time | 3 years (working once a day) |
| LED lights | 2 LED lights show GPS, GSM status |
| Light tamper | yes |
Light-Sense GPS TRACKER Standby King Instructions
1. this product uses high-quality high-tech lithium-iron battery pack, battery life of 15 years, long standby for 3 years,
The upload interval can be arbitrarily set to 10 minutes – 9999 hours and 59 minutes.
2. the scope of use: rental cars, loan vehicles, logistics vehicles and valuables tracking, positioning.
3.the owner number can only be bound to one, the last binding is valid,
Instruction: 101# car owner phone number #.
4. the light sense of dismantling the alarm: the device changes from the dark to the bright place or change from the bright place to the dark place, it will automatically start the work once, and will be reported by SMS or platform SOS alarm way, telling the owner of the equipment was removed.
5. Mobile client, WeChat check car, check the car website, please contact the dealer.
6. The terminal will start working when you plug in the card. In the absence of any settings, the terminal will work 24 hours a day according to your boot time, once for 3 minutes, and then shut down.
Software client-side
Scan the QR code download software APP “Roadragon-V” to cell phone client-side.
For PC: https://www.dbgps.com/
For Android,
You can download the app from “google play” by searching “Roadragon-V”
For Iphone,
You can download the app from “app store” by searching “Roadragon-V”
Note: the installation process prompts whether to trust this program, or whether to allow access to mobile phone location, please choose trust or allow.
Open APP client-side, choose license plate number login in，platform website please enter into：https://www.dbgps.com/，license plate number please type device ID number on box(ten number)， default passwords as 123456, Finally click login to the main menu. (advice for the first time after landing please amend and remember the passwords)
8 Precautions
Please use the terminal’s original battery. Using any other accessory will invalidate all warranty services.
The terminal manufacturer will not assume any warranty liability for any damage resulting from the use of non-original fittings on the terminal;
Do not soak the battery in water or put it in a fire, do not bend or force open the battery;
Do not disassemble the terminal. Improper handling by non-professionals may result in damage to the device. The battery is a one-time special battery that does not allow charging.
