Newly Arrival Maersk Vessel Tracking - solar sun powered gps tracker with free app and platform software for car vehicle container kingneed – Dragon Bridge

Solar GPSBD dual mode positioning terminal

Product model: LLS-100T

Solar GPS locator

Technical Parameters

1. Platform: Low-power MCU+CDMA/GPRS module)+GPS/Beidou dual-mode positioning module+G sensor
2. Band: GSM850/GSM900/DCS1800/PCS1900 (optional support for CDMA 1X)
3. Battery capacity: 3000mAh (5000mAh optional)
4. GNSS type: Beidou/GPS dual mode
5. A-GNSS Auxiliary: Support
6. Tracking sensitivity: -163dBm Capture sensitivity: -159dBm
7. Search time: Hot start 1S Cold start 40S (open conditions)
8. Positioning accuracy: less than 5 meters (open conditions)
9. Solar panel specifications: Single crystal gauge, voltage 5.5V, current 200mA, conversion rate 21.5%
10. Protection level: IP67
11. Applicable environment: -30°C~85°C
12. Dimensions: 135mm*80mm*19mm (excluding the base)

Product Function

1. Supervision of the daily position of small fishing vessels;
2. Navigation track management;
3. Supporting blind zone supplements;
4. Solar charging, no external power supply is required, the power can be inquired, and the low-power active alarm;
5. Support tamper alarm;
6. Support one-button emergency alarm, except alarm, sound and light reminder;
7. The product meets the IP67 three-proof standard and is resistant to salt spray corrosion;
8. Having a solar charge status inquiry;
9. Flexible setting of the location upload interval, respectively, setting the parking and uploading data upload interval;
10. has low power protection function;

Application scenario

The LLS-100T is a positioning terminal specially designed for marine positioning monitoring applications. LLS-100T can realize the position monitoring and tracking of outdoor valuable assets such as ships through GPS/BD satellite positioning technology, solar charging technology, GSM/GPRS communication technology, and multi-mode flexible configuration of location service monitoring and management system. The device has a tamper-evident alarm function, and the management center can monitor the device in real time. At the same time, it also has a one-button alarm function. In case of emergency, it can send an alarm to the management center through the button.