Special Price for Seago Tracking - gps tracking padlock GLL150 3G Device tracking navigation 3G Remote management – Dragon Bridge

Short Description:

          Intelligent lock operation instructions                    (V1.0) 1.Main pieces and accessories: 1. the logistics lock a host 2. a charger 3. a chain line 4. warranty card 5. certificate 2.Specific use steps 1. Select SIM card: You can use mobile or Unicom’s 2G SIM card, or Unicom 3G card Supports SMS / GPRS function and has sufficient balance. 2. Remove the four screws from the rear cover, open the rear cover of the device, insert the SIM card into the SIM card slot and loc...


Product Detail

Product Tags

Related Video

Feedback (2)

Our personnel are always inside the spirit of "continuous improvement and excellence", and together with the outstanding excellent goods, favorable price and good after-sales services, we try to gain every customer's trust for Mediterranean Shipping Company Tracking , Motion Gps Drivetime , Vehicle Car Camera , Now we have extensive goods source as well as price tag is our advantage. Welcome to inquire about our products and solutions.
Special Price for Seago Tracking - gps tracking padlock GLL150 3G Device tracking navigation 3G Remote management – Dragon Bridge Detail:

          Intelligent lock operation instructions                   

(V1.0)

图片1

1.Main pieces and accessories:

1. the logistics lock a host

2. a charger

3. a chain line

4. warranty card

5. certificate

2.Specific use steps

1. Select SIM card:

You can use mobile or Unicom’s 2G SIM card, or Unicom 3G card

Supports SMS / GPRS function and has sufficient balance.

2. Remove the four screws from the rear cover, open the rear cover of the device, insert the SIM card into the SIM card slot and lock it.

TIM截图20180911100530 2 

 

 1.Turn the switch to ON, smart lock boot.

TIM截图20180911100634 

2.Install the SIM and turn on the battery switch, cover the bottom cover, on the good screw

图片1 

3.unlock

Put the RFID card on the shell RFID tag position, this time the lock electric will turn, when the lock is successful, the buzzer will ring a reminder.

 

 

TIM截图20180911100747 TIM截图20180911100816

 4.lock off

Insert the lock line into the keyhole, when the lock detects the lock line is installed normally, the lock will automatically lock, when the lock after the buzzer will ring a reminder. When the motor lock in the lock when the change, the buzzer will prompt the user long, the lock failed, please re-lock.

3.Set the machine parameters:

After you have read the above description of the product, the product has been installed and the SIM card is installed. The following specific operation to start using.

 Note: So the SMS command should be entered in English mode, the command error or format error will not reply.

1.Device IP address and Port

Send the message to the device number on the instruction format:

AS1234*F10#1,113.106.93.50,8011,1#

Reply to terminal parameters

IP:113.106.93.50,8011,1,cmnet,gprs,gprs,ID:31684086,M:6,GPS:A,9,CSQ:19,CGR:5,ACC:1,BAT:65%,VER:AT10-V1.0

Such as:

IP address:113.106.93.50 port:8011,TCP

Order“AS1234*F10#1,113.106.93.50,8011,1#”

The instruction is * AS *, “1234″ is the password, the initial default is 1234, “* F10 # 1″ means that this command is to set the machine’s IP instruction, 113.106.93.50 that the machine is connected to the server, 7001 for the port, 0 means the machine uses UDP to connect with the platform, if you want to use TCP to 1.

2.Query terminal status   

Send SMS to device number, instruction format

AS1234STATE#

Reply terminal parameter

IP:113.106.93.50,8011,1,cmnet,gprs,gprs,ID:31684086,M:6,GPS:A,9,CSQ:19,CGR:5,ACC:1,BAT:65%,VER:AT10-V1.0

IP: 113.106.93.50 Represents the server address reported by the current machine,

Port: 7001 Represents the port of the current machine,0 means UDP Report,If it is 1 means TCP report

Cmnet,gprs,gprs:means current device APN

ID:31684086 means device ID number

GPS:A,9 means the positioning state of the current machine, V means  no positioning,A means,9 mean 9 level accuracy

CSQ:19,Mobile information for the current machine

CGR:5 indicates the status of the card,

ACC:1 indicates the status of the lock, the 1 is the unlock, and the 0 is the lock

BAT:65% current lock capacity

VER: AT10-V1.0 Represents the version that is currently burned by the machine

M:6 That represents the current state of the machine, 6 online, 0 said 1 initialization, query CSQ, 2 registered network, 3 query the status of the CGREG, said the 4 registered APN, 5 said the connection to the server, 7 is disconnected from the network, said the 8 call, said 9 upgrade

3.SMS unlock 

Send SMS commands “AS1234*F10#8,888888, #” to the number of terminal equipment, the contents of the “Open lock OK replied,” to this content said off terminal unlock success

The password can be unlocked remotely. For security, please consult the supplier to unlock the password.

4.Set the unlock reporting frequency 

Send SMS instructions“AS1234*F10#G,300,600,#”Number to device,The terminal replies to

“accOn:300 accOff:600 rd:0 sp:0,0s stp:0 dr:0,0 idl:0 mv:0 time:+8 cq:0,0 geo:0 step:377 ack:0 msg:2568,56 sleep:0,0

”,The terminal has returned this content to indicate successful recovery

ACCon:Represents the lock off reporting interval

ACCoff:Represents the lock on reporting interval

Sleep Represents sleep time

 5.Restore factory   

Send SMS instructions“ASAX*%UPAS”Number to device,The terminal replies to“password:1234,OK”,The terminal has returned this content to indicate successful recovery

6.Restart terminal   

Send SMS instructions“AS1234RSGS#”To the number of the device, the terminal replies to“GSM/Restart;OK”,The terminal has returned this content to indicate a successful restart

Attention:

  • All the SMS edit in English mode, Chinese mode input will lead directly to delete, do not reply sms.
  • All the messages are beginning to AS, to the end of #, format error will cause the application to not recognize.
  • The 1234 machine factory default password, if the password is wrong, will cause the application to not reply SMS

3.location monitoring

When using a computer or mobile phone to monitor the terminal, the mobile phone or computer is required to access the Intel Network normally.

Enter in the IE browser’s address bar: https://bs.flyinggnss.net/, as shown in the following figure:  test account : lqtest   pass code: 123456

图片2

Enter the account password and enter the monitoring platform. As shown in the following figure:

 图片3

 

1.Basic operation:

1) Inquiring vehicle,

in the monitoring platform, point monitoring center, into the monitoring interface, click on the list, click the license plate click on designated vehicles, that can query the platform to the location of the vehicle

图片4

Corresponding positioning information will appear on the map. As shown in the following figure

 图片5

On the map can display the lock position, unlock state, power, unlock number and other information.

According to the tips behind the vehicle, you can see whether the vehicle is on the line. As shown in the following figure:

 图片6

 b.Click the query in the map monitor bar,

In the content box, enter the fuzzy information, in the list below, you can display the input information relating to the vehicle. Click on the vehicle you need to query to display the corresponding text and map vehicle information on the right. As shown:

 图片7

(Note: the addresses on the corresponding map are displayed, and the last location is the location information displayed.)

2) Give instructions to designated vehicles:

a.Order to unlock

Select the vehicle you want to operate, and have a more choice on the right side of the car,

 图片8

More points into the selection of the next instruction, select the unlock item, you will ask for input authentication password, test password default 888888, in use, please modify the password, and do not leak.

 图片9

Enter the password after the point unlock, the terminal received the terminal will answer the unlock successfully, on the platform will show unlock.

Main user interface :

 图片10

Folloing ing are details :

1.More instructions

图片11

2.Open lock remotely

 图片13

3.Set the lock interval time

 图片14

4.History Route Playback :

图片15

5.Choose time and comfirm OK

 图片16 图片17

6.Geo-fence

 图片18 图片19

7.Online tracking:

图片20 图片21

8.Find and check fleetmanagement data

 图片22


Product detail pictures:

Special Price for Seago Tracking -
 gps tracking padlock GLL150 3G Device tracking navigation 3G Remote management – Dragon Bridge detail pictures


Related Product Guide:
Lytx DriveCam Enterprise Review & Rating | Good Car Camera
Mayo Clinic uses telemedicine in ambulances to assess stroke patients | Jacksonville Fleet Management

High quality Initial,and Buyer Supreme is our guideline to offer the ideal assistance to our shoppers.At present, we are striving our best to become amongst the ideal exporters inside our industry to satisfy shoppers more want for Special Price for Seago Tracking - gps tracking padlock GLL150 3G Device tracking navigation 3G Remote management – Dragon Bridge, The product will supply to all over the world, such as: Uruguay , The Swiss , New Delhi , Customer satisfaction is our goal. We are looking forward to cooperating with you and providing our best services for you. We warmly welcome you to contact us and please feel free to contact us. Browse our online showroom to see what we can do for you. And then E-mail us your specifications or inquiries today.
  • This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
    5 Stars By Nydia from Norway - 2015.06.09 12:42
    Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
    5 Stars By Steven from Bangladesh - 2015.11.02 11:11