LTS-5YS 4G 5 years ghost GPS tracker
- Network: 4G CAT M & 2G
- Standby time: last for 5 years 1 day 1 ping
The LTS-5YS-4G is a 4g intelligent 5 yearsLong standby GPS device for tracking, built for the car network, supports multiple position mode:GPS、AGPS、LBS. Track your assets with a powerful battery, When an emergency occurs, you can enter the continuous tracking and positioning mode to find assets. Built-in strong magnetic to ensure the product to stick firmly on the metal interface, easy to install and conceal, support tamper-proof alarm.
Function
1、 No wired needed, easy for installation
2、 This product is with the built-in large-capacity disposable lithium-ion battery, with ultra-low self-discharge rate and extremely wide temperature adaptability.(The normal lithium battery could only work under temperature 0℃~70℃)
3、 Long working time: If upload one packet every 24 hours under GPS position priority condition, the working time can reach up to 1095 days above, no need to change battery frequently.
4、 Ultra-low consumption: The working current can decrease to 15uA below when in sleep mode, to make sure the terminal could work longer.
5、 Comparing with the similar product available on the market, this terminal is with the smallest size and easy for concealable installation
6、 Built-in strong magnetic to ensure the product to stick firmly on the metal interface, easy to install and conceal, support tamper-proof alarm
7、 Multiple position mode:GPS、AGPS、LBS
Customizable metal connectors are used for cylindrical non-metal asset objects, similar to water pipes, cables, and optical fibers
Specifications
Characteristic | Description |
Built-in battery specification | Disposable Lithium-ion battery and (3.6V,8100mAh)and ultra-low discharge rate:less than 1%, store one year below 25℃ |
Power consumption | Average working current <100mA; Power save current <15uA |
Battery working time | 5 years |
Dimension |
81mm(L) × 65mm(W) × 31mm(H)
|
Weight | 192±5g(Light sensor Standard) |
Working Temperature | -20℃~70℃ |
Frequency | GPRS: 850/900/1800/1900MHzCat.M1/Cat.NB1: LTE FDD B1/B2/B3/B4/B5/B8/B28 |
GNSS | GPS L1:1575.42MHz,C/A CodeBD B1: 1561.098MHz |
Functions
【Basic function】
1 Position monitor
The default setting is the terminal would send one packet every 24 hours, the packet information includes : Position status, longitude and latitude, GSM Signal Strength, GPS numbers, battery voltage, etc, the upload interval can be configured
2 AGPS
The terminal is with APGS function, when the terminal connects GPRS; AGPS is used for speeding up the position speed and improve the position accuracy
3 LBS
The default position mode is by GPS, when GPS enters into the blind zone and can not position accurately, the terminal will switch to LBS, LBS provides the reference location which is not very accurate
4 Blind zone compensation
When the terminal enters into the blind zone when in sleep mode, it will store the trace data according to the preconfigured time interval and it will upload the data in the blind zone to the backend,
Remark: 3YSN(4G) upload 8-16 pack blind zone compensation data,
5 Intelligent tracking function
When found the vehicle is stolen or in other emergency cases and the real-time location of the vehicle needs to be checked, an SMS can be sent or send a command from the backend, when the terminal starts work next time, it will receive this command and enter into track mode, and upload the location data according to the preconfigured interval by the customer until a stop tracking command is received
6 Warehouse mode
The terminal can set the storage return interval, with a value range of 2880-43200 minutes.
The device will upload data according to the storage return interval after setting the storage return interval. It can wake up by disassembling the machine, set the return transmission interval, set the alarm clock, through exit warehousing mode command to exit warehousing mode.
Remark: remove the machine to wake up and exit the storage mode command to restore the original parameters, set the return interval and alarm clock by the set value of wake-up.
7 Motion still detection mode
Default to open, wake up once in 60 minutes when move, wake up once in 720 minutes when static; the return interval ranges from 5 to 43200 minutes;
When motion is detected, wake up after 1 hour (default), and turn off G-SENSOR during sleep, that is, the device cannot be woken up by vibration;
When the detection is still at rest, wake up 12 hours after the sleep (default value), G-sensor enters the low power mode during sleep, continue to detect the vibration, and wake up the device by vibration;
After waking up by vibration, if no continuous vibration is detected (more than 4 seconds), the device sleeps;
The motion still detection mode can be turned off by an instruction
8 Clock mode
The terminal could verify the timely wake-up time points, maximum 4 points can be set for the position that is more accurate and connection to the server, this function could use SMS command or backend command to set
9 Temperature and humidity detection
The device built-in temperature and humidity sensor, it read the temperature and humidity first once the initialization of the machine then will read it every 16 seconds. The temperature precision is 0.1%., the humidity precision is 1%.
10 Backend Specific Commands
Since the working time of the terminal is short, it is rare to receive the SMS, to ensure the command sending efficiently, the backend uses a specific command for MT06CW which can preset the command when the terminal is online, the backend will automatically send this command, to make sure the commands are properly received.
11 Battery level detect
The terminal will upload the battery level status together with the location data pack, and display the battery level on the backend so the user could well know the balance battery, and meanwhile display the current transmission time and the balance battery level of the next uploading pack, so the user could have a clear view on the terminal status
【3YSW(4G) Extended functions】
1 Strong Magnetic function
3YSW(4G)C is with built-in with the super-strong magnet that can firmly stick the device to the metal surface, which is easy to install and conceal
2 Tamper alarm
3YSN(4G)C: There is a removal button at the bottom, if the terminal has tampered, it will enter into activate status, and report the current location information.
There is a high sensitive light sensor at the bottom, if the terminal has tampered, whether the terminal is in sleep mode, it will be activated and enter into the anti-removal status and switch on the anti-removal alarm, report the alarm info to the backend or preset phone number.
3【5YS(4G) function list】
ModelFunction list |
3YSW(4G)( Light sensor) |
3YSW(4G) (Light sensor and strong magnetic) |
Position |
˜ |
˜ |
GPS/BDS |
˜ |
˜ |
AGPS |
˜ |
˜ |
LBS |
˜ |
˜ |
Light Sensor |
˜ |
˜ |
Warehouse mode |
˜ |
˜ |
Strong magnetic |
˜ |
|
Motion still detection |
˜ |
˜ |
Temperature and humidity detection |
˜ |
˜ |
Intelligent tracking |
˜ |
˜ |
Blind zone compensation |
˜ |
˜ |
Clock mode |
˜ |
˜ |
Backend commands |
˜ |
˜ |
Upload ICCID |
˜ |
˜ |
Battery level |
˜ |
˜ |
5YS(4G) usage requirements
The users are required to strict using the terminal according to the operating instructions, any disassemble, collide, charge, soak, over 80 °C, human failure, force majeure damage, etc. may cause a short circuit, insufficient working time, battery deformation, liquid leakage, explosion,and compensation will be provided by Roadragon.