4G Four-way temperature sensor refrigerator truck GPS tracker G-V202

Short Description:

G-V202 is a Highly Integrated Car Terminal, supports a 4-way temperature sensor refrigerator. The host of this terminal is a low-power wireless transmitter and receiver. It receives and sends radio frequency signals during use. G-V202 support RS485 or RS232 or CAN interface. 1. Data transmission: This product supports 2G (GSM) / 3G / 4G / NB mobile network 2. Positioning: Use a high-sensitivity GPS / BD module to obtain position information more accurately; 3. SOS alarm: One-button emergency ...


  • Min.Order Quantity: 10 Piece/Pieces
  • Supply Ability: 30000 Pieces per Month
  • Port: Shenzhen, China
  • Payment Terms: L/C,D/A,D/P,T/T
  • :
  • Product Detail

    Product Tags

    G-V202 is a Highly Integrated Car Terminal, supports a 4-way temperature sensor refrigerator. The host of this terminal is a low-power wireless transmitter and receiver. It receives and sends radio frequency signals during use. G-V202 support RS485 or RS232 or CAN interface.

    531ba900bd718b87791bac1d7f773ee
    d5cb51235f36923d6709b769e06e32f
    4471f3967883e252633cb5019073a8a

    1. Data transmission: This product supports 2G (GSM) / 3G / 4G / NB mobile network

    2. Positioning: Use a high-sensitivity GPS / BD module to obtain position information more accurately;

    3. SOS alarm: One-button emergency alarm (requires optional SOS button);

    4. communication interface: external temperature sensor, tire pressure, fuel consumption sensor, CAN BUS bus;

    5. Taking pictures: The external camera of the terminal can realize remote taking pictures;

    6. analog detection: the terminal supports detection of analog signals, such as voltage;

    7. Low output: The terminal supports two low-output signals, which can be used to drive oil cut off, alarm, etc .;

    8. Under-voltage alarm function: When the vehicle battery voltage is too low, the terminal will generate a battery under voltage alarm to the platform;

    9. Power failure alarm function: When the external power supply of the terminal is disconnected, the terminal will generate a power failure alarm to the platform;

    10. Remote upgrade: remote terminal software can be updated;

    11. Remote query and setting parameters: remote setting, query parameters and location query via SMS, platform;

    12. Blind zone supplementary transmission: When the vehicle is driving to no mobile network signal or network, the terminal will store the position information at this time.

    Come, wait for mobile network recovery to send to the server immediately, up to a million storage;

    13. Electronic fence: The terminal support service platform sets up an electronic fence, which needs server platform support;

    14. Speeding alarm: When the vehicle speeds over the preset limit when the vehicle is driving, the terminal will generate an over-speed alarm and upload it to the location server

    15. Remote oil and power-off: The terminal supports remote oil and power-off function;

    16. Remote restart: The terminal supports the remote restart function;

    17. Custom input and output: The terminal has a maximum of 4 custom inputs and 2 custom outputs, which can be configured accordingly as required;

    18. Collision alarm: the built-in sensor can detect the collision of the vehicle;

    19. Mileage statistics: The terminal can accurately count the mileage of the terminal after it is installed on the vehicle;

    20. Support RS485 or RS232 or CAN interface.

    Identification

    Wiring color

    Features

    1

    BAT

    red

    Power supply positive terminal, connected to car battery positive terminal

    2

    GND

    black

    Negative power supply, connect to the negative battery of car or ground

    3

    ACC

    Orange

    ACC high detection (optional speed detection)

    4

    5V

    Fine red

    5V output / high input 1

    5

    TX

    green

    RS232 TX / RS485-A / CAN + / low output 1

    6

    RX

    yellow

    RS232 RX / RS485-B / CAN- / low output 2

    7

    GND

    black

    Negative power supply, connect to car battery negative or ground, depending on the actual situation

     

    Identification

    Wiring color

    Features

    1

    BAT

    red

    Power supply positive terminal, connected to car battery positive terminal

    2

    GND

    black

    Negative power supply, connect to the negative battery of car or ground

    3

    ACC

    Orange

    ACC high detection (optional speed detection)

    4

    5V

    Fine red

    5V output / high input 1

    5

    TX

    green

    RS232 TX / RS485-A / CAN + / low output 1

    6

    RX

    yellow

    RS232 RX / RS485-B / CAN- / low output 2

    7

    GND

    black

    Negative power supply, connect to car battery negative or ground, depending on the actual situation

    Fault resolution

    Failure phenomenon

    fault resolution

    The terminal has been unable to connect to the background server after the first installation, and the background display is not online Whether the main power wiring is correct, take care not to connect it to the car's internal control line;
    Whether the SIM card is correctly installed;
    Check parameter settings;
    Check whether the identity information of the terminal is correctly entered on the platform;
    Whether the ACC line is connected, insert the car key and connect to ACC ON;
    Check whether it has been located. If it is not located, go to the outdoor open area for the first time;

    Terminal shows offline status in background

    Dial the SIM card number of the device to see if you can hear the phone connection;
    Whether the SIM card is in arrears and whether the GPRS data service is cancelled;
    Whether the vehicle has no GSM network signal coverage in the basement;
    Observe whether the offline area is offline or all offline, and determine whether it is a network problem of the operator;

    The terminal is not positioned for a long time or the positioning deviation is large

    Whether the front installation is correct, facing up to the sky;
    Whether there is a substance (such as metal) that absorbs electromagnetic waves above the front installation location, and whether there is an explosion-proof thermal insulation film on the glass above the location (the higher metal content in the film will absorb high-frequency electromagnetic waves);
    Observe whether there are tall buildings obstructing satellite positioning signals in the surroundings, avoid metal shields and stay away from high-power signal sources. Please drive to a more open place for positioning. Generally, the first positioning time takes 1-2 minutes;When the p
    When the positioning is inaccurate, please pay attention to check whether the LED is positioned. If it is not positioned, it is the historical position point or LBS position. When the positioning indicator is always on and inaccurate, please check whether the turnover environment has a unidirectional or Y-plane signal reflecting the building.

    LED is off after power on

    Please check whether the car battery voltage is normal;
    Whether the main power wiring is correct, take care not to connect it to the car's internal control line;
    Please check whether the fuse of the main power wiring is blown;

    1.Green LED, network indication

    Indication status

    LED status

    Search network

    Fast blinking, 0.5 on, 0.5 second off

    Already registered on the network

    On for 0.5 seconds and off for 1 second

    Connect to server

    Always on

    2.Blue LED, GPS positioning indication

    Indication status

    LED status

    Not targeted

    Fast blinking, 0.5 on, 0.5 seconds off

    Targeted

    Always on


  • Previous:
  • Next: