automobile tracking devices Long Connection GPS Tracker mt008

Short Description:

 G-MT008 GPS Vehicle Tracker (GPS+GSM+SMS/GPRS) (Version 1.0)   Accessories: Power line                                         Relay MT008 is a GPS tracker that easily installs to a car’s power source. Perfect for tracking fleet vehicles, this best-in-class GPS device features improved accuracy, and it’s designed specifically to make locating and routing vehicles as simple as possible. It has built-in vibration sensor for intelligent vehicle anti-theft.  1. Functions l GSM 8...


  • Min.Order Quantity: 10 Piece/Pieces
  • Supply Ability: 30000 Pieces per Month
  • Port: Shenzhen, China
  • Payment Terms: L/C,D/A,D/P,T/T
  • Product Detail

    Product Tags

     G-MT008 GPS Vehicle Tracker

    (GPS+GSM+SMS/GPRS)

    (Version 1.0)

     产品描述 62

    Accessories:

    Power line                                         Relay

    产品描述 135产品描述 318

    产品描述 321 产品描述 331

    MT008 is a GPS tracker that easily installs to a car’s power source. Perfect for tracking fleet vehicles, this best-in-class GPS device features improved accuracy, and it’s designed specifically to make locating and routing vehicles as simple as possible. It has built-in vibration sensor for intelligent vehicle anti-theft. 

    1. Functions

    l GSM 850/900/1800/1900MHz

    l Voltage: 9-50V DC

    l GPS location, GPRS timing report

    l Inquires the position by SMS or mobilephone or PC

    l Built-in vibration sensor, vehicle anti-theft

    l ACC ignition signal detection, vehicle state hint

    l Can remote control vehicle cut-off oil or electric

    l One SOS key

    l Remote monitorin;

    l Power cut-off alarm

    2. Specification

    GSM: 850/900/1800/1900MHz

    GPRS: Class 12, TCP/IP

    Voltage: 9-50V DC 

    Current:≈22mA(12vDC)

    ≈12mA(24vDC)

    GPS fixed time:  Cold start 30sec(open sky)

    Warm start 29sec(open sky)

    Hot start 5sec (open sky)

    GPS fixed precision: 10m (2D RM)

    Temperature: -20℃ ~ +70℃

    Humidity: 5% ~ 95% RH

    Dimension: 90.0(L)x45.0(W) x13.5(H)mm

    Weight: 80g

    3. Installation comands

    3.1 Prepare

    3.1.1 SIM Card:  Please use a GSM SIM card.

    3.1.2 Before insert the SIM card, please make sure to turn off the device.

    3.1.3 Please make sure the GPRS can be used, if not, please connect Service Provider.

    3.1.4 Please make sure the Caller ID can be used.

    3.1.5 Then insert the SIM card.

    4.Power on/off

    Power on: Before power on, please insert the effective SlM card, and connect all the wiring. The device will auto power on when the outside power input. If no outside power input, long press key for over 5 seconds, the device will power on, then you will see LEDs flickering.

    Power off: When the device power on, long press key for over 5 seconds, the device will power off, then you will see LEDs no light. If outside power inputs also exist, the device will auto restart again.

    LED scintillation state meaning interpretation

    LED

    Scintillation state

    Meaning

    Red

    Power LED

    Shine 0.1 sec, dim 2 sec

    Working

    Shine 1 sec, dim 2 sec

    Low power

    Always dim

    Power off or fault

    Blue

    GPS LED

    Shine 0.1 sec, dim 2 sec

    GPS Fixed

    Shine 1 sec, dim 2 sec

    GPS not Fixed

    Always dim

    Power off or fault

    Yellow

    GSM LED

    Shine 0.1 sec, dim 2 sec

    GSM ready 

    Shine 1 sec, dim 2 sec

    GSM not ready

    Always dim

    Power off or fault


  • Previous:
  • Next: