Well-designed Gps Asset Tracking - magnetic gps tracking device Long Standby GPS Tracker LTS-100DS – Dragon Bridge Detail:
GPS TRACKER
LTS-100DS
(GPS+AGPS+LBS+GSM+SMS/GPRS)
1. Product introduction
GPS TRACKER Tracker combines GSM wireless communication technology and GPS global positioning system technology, using industrial-grade fire protection materials, six 18MM × 3MM strong magnetic devices, IPX-5 waterproof design, built-in 8000MAH large-capacity battery, long standby for 100 days , Through the SMS and global positioning service platform for remote target positioning and monitoring management. Magnetic free installation design, easy to use.
2.Field of application
● Car Rental / Small Fleet Management
● Outdoor activities
● Guardianship of children/elderly people/disabled persons/valuables
● Personal security
● Staff Management
● Tracking and positioning
● Animal Protection and Range Management
3.Specification Description
Item | specification |
Charging voltage | DC 5V/1000mA (MICRO USB) |
Built-in battery | 10000mAh (4.2V) |
size | 2.5*8*11cm |
Weight | 300g |
Operating temperature | -20° to 55° C |
Working humidity | 5% to 95% Non-condensing |
GSM module | Quad-band GSM 850/900/1800/1900Mhz |
GPS chip | TD1030 GPS+ BeiDou Dual Mode Positioning Chip |
GPS sensitivity | –162Db |
GPS frequency | L1, 1575.42 MHz |
C/A code | 1.023 MHz chip rate |
Channels | 56 channel all-in-view tracking |
Position accuracy | 10 meters, 2D RMS |
Speed accuracy | 0.1 m/s |
Time accuracy | Satellite time 1 microsecond synchronization |
Default data | WGS-84 |
Update time | Average 0.1 sec. |
Hot Start | Average 1 sec. |
Warm start | Average 30 sec. |
Cold start | On average 32 sec. |
maximum height | 18,000 meters (60,000 feet) max. |
Maximum speed | 515 meters/second (1000 knots) max. |
Maximum acceleration | Less than 4g |
Instantaneous displacement | 20 m/sec |
Standby time | 100 days |
LED lights | 3 LED lights show charging, GPS, GSM status |
4. Product acessories
● 5V 1000MA Charger One
● One charging line
● Use guide and warranty card
● One GPS TRACKER tracking device
5.Instructions for use
5.1 SIM card installation and device startup
5.1.1 Open the packing box and check whether the device model is correct and the accessories are complete. Otherwise, please contact your dealer.
5.1.2 SIM card selection, the device needs to insert a GSM SIM card, GSM card Unicom or mobile optional (Global GSM network)
5.1.3 Installation of the SIM card, disassemble the device waterproof plug, according to the label, insert the SIM card chip downwards into the card slot, and put on a waterproof plug.
Note:
(1) The card is automatically turned on;
(2) The device SIM card needs to enable the GPRS function;
(3) The equipment SIM card needs to enable the caller ID display function (open or not open according to the function required by the customer);
(4) If your SIM card is turned on and you are asked to enter your SIM PIN, please refer to your phone’s user manual to switch the SIM PIN feature off;
(5) Please make sure the equipment SIM card has a fee.
(6) To avoid burglar damage, equipment selection should be concealed as much as possible;
(7) Avoid placing with sources, such as reversing radars, anti-theft devices and other telematics equipment;
(8) The device has a built-in GSM antenna and a GPS antenna. It should be installed face up (towards the sky) and there should be no metal shielding shielding.
5.1.4 Indicator Description
5.1.4.1 Red light – charging indicator
The status of the light |
Meaning |
Chang Liang |
Charging / normal work |
not bright |
Charging full/off |
5.1.4.2 Yellow Lights – GSM Indicators
The status of the light |
Meaning |
Flash once in 2 seconds |
GSM initialization |
Chang Liang |
GPRS communication is normal/already online |
not bright |
GSM dormancy |
5.1.4.3 Blue light – GPS indicator
The status of the light |
Meaning |
Flash once in 2 seconds |
GPS signal search |
Chang Liang |
GPS has been positioned |
not bright |
GPS sleep |
5.2 Equipment charging
Each time the device is charged, charge it for more than 20 hours. Please use the original charger and battery.
Note:
(1) The battery of this product contains chemical components. Please do not use force to beat, prick and put into fire
(2) Please charge in time to ensure the normal operation of the equipment.
5.3 Master Control Number Settings
5.3.1 The master number can only be bound to one, and the last bound master number is valid.
5.3.2 The default master control number password is: 123456;
5.3.3 The command to set the master control number is: admin123456 13712345678 reply: admin ok;
5.3.4 modify the master control number password command: password123456 666888 (666888 for the new password) Reply: password ok.
Note: The GPS TRACKER sets the parameters via SMS. The master control number sends the SMS code to the device’s SIM card number. The separated symbol is a comma. The comma in the following function parameter setting instruction format is the English input state format.
5.4 Google Links
SMS inquiries latitude and longitude information, any number to send instructions to the device, will reply latitude and longitude to the mobile phone number
Instruction format: g1234
Note: In the location query, when the GPS signal is not good, the received latitude and longitude information is the place where the GPS signal was received in the longitude and latitude. If there is a deviation from the location, it is necessary to pay attention to the time information contained in the latitude and longitude information.
5.5 Base Station Positioning (Main Control Number Transmission Valid)
Turn on the base station positioning command: jz=1 Reply: OK
Turn off the base station positioning command: jz=0 (default) Reply: OK
5.6 Chinese Address Search
When it is necessary to query the Chinese location information of the device, a location query short message can be written and sent to the device’s SIM card, and the device can reply to the last location information.
SMS command: 123
Note: Chinese address reply requires monitoring platform support.
5.7Sleep power saving mode setting
5.7.1 Single Operation Mode
Command Format: DW05 Re: Gps Time Set OK
The device enters sleep mode after entering for 5 minutes. The vibration cannot be awakened. It can be sent to a single working mode continuously.
Work mode, automatic operation mode instructions change the working state to wake the device.
5.7.2 Automatic Operation Mode (Default)
The device did not set any alarms. There was no operation after 5 minutes and the device went to sleep: GPS was off and GPRS was off. There is a phone call and a text message or a shock will instantly wake the device.
Automatic working mode command format: auto123456 reply: Set OK
5.7.3 Continuous Mode (Sleep Off)
Continuous operating mode instruction format: nslp123456 Re: Set OK
5.7.4 Upload Interval Settings (120 seconds by default)
Upload interval setting instruction format: upmove123456 120 reply: Set OK
5.8 Arm/restart and factory reset
5.8.1 SMS fortification: SF reply: SF OK
SMS Disarm: CF Reply: CF OK
5.8.2 Reboot Device SMS Command: CQ
Re: system reset ok!
5.8.3 Restoring Factory Settings SMS Command: FORMAT
Re: restore the factory value is successful, please re-bind the owner number!
6.Monitoring platform applications
6.1 real-time monitoring, network / mobile check car
GPS+LBS dual-mode positioning, GPS positioning accuracy of 2 meters, with GPS signal GPS positioning, no GPS
Location of the signal is localized by LBS base station, dual mode automatic switch, keep your device always online, ensure your monitoring
365 days x 24 hours is online.
Platform real-time monitoring: Computer Internet access monitoring platform
6.2 Track playback
Login platform, click on the historical track playback function
6.3 Report Statistics
The logistics company can use this software to set the departure time, route notifications, line alerts, and area of the monitored goods.
Alarms, collision alarms, rollover alarms, driving speeds, etc. We will comprehensively analyze the status of goods in transit and issue statements.
Landing platform, point report statistics.
6.4 Windows, Android, Ipad, Iphone, Wechat Customer Service Please download to the dealer service platform.
Client applications please contact customer service.
7.Trouble shooting
7.1 After the device is installed for the first time, it cannot connect to the background server. The device is not online in the background. Please check the device installation:
7.1.1 Is the device fully charged?
7.1.2 Is the SIM card installed correctly? Refer to the user guide.
7.1.3 Check the status of the LED indicator, please refer to the description of the indicator;
7.1.4 Check if the GPS is positioned. If it is not positioned, go to the outdoor open area for the first time.
7.2 The device is offline in the background
First observe whether the three indicators of the device are normal. In the absence of conditional observation, you can first check the SIM card.
The status is as follows:
7.2.1 dial the device’s SIM card number to see if it can hear the phone connected to the sound;
7.2.2 Whether the vehicle does not cover the GSM network signal in the basement;
7.2.3 Observe whether the dropped line area is dropped individually or all to determine whether it is an operator network problem.
7.2.4 Whether the SIM card owes fees;
7.2.5 Has the GPRS service been cancelled (offline on the last day of the month);
7.2.6 Query parameter settings to check if the GPRS transmission interval is correct.
7.3 If the GPS function of the device has been activated but it has not been positioned for a long time, check whether the installation position of the device meets the requirements.
Please refer to the usage guide.
7.4 When the GPS signal reception environment is poor (surrounding tall buildings block the GPS signal), please drive to the sky to open
A wide area to locate, generally takes 1-2 minutes to locate for the first time.
8.Software client-side
8.1 Scan the QR code download software APP “Roadragon-V” to cell phone client-side.
8.2 For PC: https://www.dbgps.com/
8.3 For Android,
You can download the app from ”google play” by searching “Roadragon-V”
For Iphone,
You can download the app from ”app store” by searching “Roadragon-V”
Note: the installation process prompts whether to trust this program, or whether to allow access to mobile phone location, please choose trust or allow.
Open APP client-side, choose license plate number login in,platform website please enter into:https://www.dbgps.com/,license plate number please type device ID number on box(ten number), default passwords as 123456, Finally click login to the main menu. (advice for the first time after landing please amend and remember the passwords)
Product detail pictures:
Related Product Guide:
Embark’s Self-Driving Truck Goes L.A. to Florida in Latest Journey – Drivers | Fleet Management System Features
Omnitracs ELD-Compliant Fleet Management | Good Car Camera
To meet the customers' over-expected gratification , we have our robust crew to offer our best over-all support which includes marketing, income, coming up with, production, excellent managing, packing, warehousing and logistics for Well-designed Gps Asset Tracking - magnetic gps tracking device Long Standby GPS Tracker LTS-100DS – Dragon Bridge, The product will supply to all over the world, such as: New Delhi , Switzerland , Mozambique , We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market.
By Lena from Palestine - 2015.10.09 19:07
As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.
By Lauren from Cairo - 2015.11.04 10:32